拉曼光纤放大器
拉曼光纤放大器
拉曼光纤放大器
Raman Fiber Amplifiers for Amplification of Single Frequency Narrowband Signals
1053/526nm, 1064/532nm, 1120/560nm, 1140/570nm, 1160/580nm, 1166/583nm, 1178/589nm, 1185/592nm, 1212/606nm, 1240/620nm, 1256/628nm, 1284/642nm, 1294/647nm, 1340/670nm.Custom wavelengths also available.
MPBC’s Raman Fiber Amplifier System is capable of amplifying a narrow, linearly-polarized, near-IR input signal without spectrum broadening. NIR output powers of up to 8 Watts at wavelengths between 1030nm and 1340nm can be achieved in our standard air-cooled enclosure, with higher power available upon demand with our water-cooled enclosure. In addition, MPBC offers the option of converting the near-IR signal into the visible region using our Second Harmonic Generator. Output power up to 2 Watts are available for various wavelengths in the visible region.
The SF System consists of three modules:
Features
Applications
Specifications
SPECIFICATIONS for RFA-SF |
|||||
Parameter |
Min |
Nom |
Max |
Units |
Comments |
Amplification Wavelength |
1030 |
|
1340 |
nm |
factory preselected |
Output Power |
|
8* |
|
W |
|
Polarization |
|
Linear |
|
|
Linear, slow axis |
Polarization Extinction Ratio |
98 |
|
|
% |
|
Power Stability |
|
|
+/- 2 % |
/hour |
APC, after 30 min warm-up |
Transverse Mode |
|
HE11 |
|
|
|
Beam Quality ,M2 |
|
|
1.1 |
|
|
* Output power is wavelength dependent, please consult factory. |
SPECIFICATIONS for VRFA-SF |
|||||
Parameter |
Min |
Nom |
Max |
Units |
Comments |
Output Wavelength |
515 |
- |
670 |
nm |
depending on model |
Output Power |
|
2* |
|
W |
|
Polarization |
|
Linear |
|
|
vertical in respect to the base |
Polarization Extinction Ratio |
98 |
|
|
% |
|
Power Stability |
|
|
+/- 2 % |
/hour |
APC, after 30 min warm-up |
Transverse Mode |
|
TEMoo |
|
|
|
Beam Quality, M2 |
|
|
1.1 |
|
|
Beam Diameter |
Nom-20% |
0.32 |
Nom+20% |
mrad |
|
* Output power is wavelength dependent, please consult factory. |