Categories

ASC Series Spectral Calibration Lamps and Assemblies

ASC Series Spectral Calibration Lamps and Assemblies

        The ASC Series spectral calibration lamp and lamp assembly constitute a complete spectral-line source. The AS260 lamp assembly consists of a power supply and lamp housing for the AS Series calibration line-source lamps.

ASC Series Spectral Calibration Lamps and Assemblies

ASC Series Spectral Calibration Lamps and Assemblies

 

  • Accommodates compact pencil-style calibration lamps. Offering various lamp selections.
  • Provides highly repeatable wavelength, linewidth, and intensity calibration standards.
  • Allows quick-on/quick-off instrument mounting. Features post mount for optical bench.
  • Five elemental emitters - Hg, Ne, Xe, Ar, and Kr.

A Complete Spectral-Line Source

The ASC Series spectral calibration lamp and lamp assembly constitute a complete spectral-line source. The AS260 lamp assembly consists of a power supply and lamp housing for the AS Series calibration line-source lamps.
As a reference standard, the atomic emission of the AS Series lamps consists of discrete spectral lines of defined wavelength, spectral width and relative intensity. The stability makes them extremely useful for calibration, alignment, and resolution testing of spectrophotometric instrumentation, including monochromators, spectrographs, spectrophotometers and detectors.
Five different calibration lamps are available: Mercury (Hg); Neon (Ne); Argon (Ar); Krypton (Kr); and Xenon (Xe). The Mercury lamp has strong spectral lines throughout the UV-VIS region.
The Neon lamp has a large number of lines of mid to high intensity in the 800nm to 3400nm range, which makes it useful for resolution testing in the NIR region . There are also a number of closely spaced lines of similiar intensity over this wavelength range.
The Xenon lamp's distribution of lines of moderate intensity between 800nm and 3500nm is useful for calibration in the IR. These emission lines are relatively close to wavelengths used by fiber optic communication systems for data transfer. Testing of fibers and detectors for these systems can be performed without the inherent high cost of lasers for light sources.
The Argon line spectrum features a number of lines of consistent high intensity between 700nm and 1000nm. These lines at such a high intensity are excellent for calibration in that region. There are also several lines spaced less than 1 nm apart that can be used for resolution testing.
A selection of the most useful spectral lines for each lamp is shown in the Tables that follow.

Feature

Value

Package:

Sealed double bore fused silica tubing.

Warmup:

2-4 minutes

Lamp Lifetime:

5000 hours (500 hours for Neon)

Power Supply:

110 to 230 VAC, 50/60 Hz

Line Cord:

6 ft. (1.83m), 3-wire ground type SJ

Output Connection:

16" (40.6 cm) cord with
polarized female connectors

Output Voltage:

1600V rms, +10%, -0%

Output Current:

0.018 Amp, +10%, -0%

Max Ambient Temperature:

35ºC

Min Ambient Temperature:

15º C

Options:

AF2 Series Fiber Optic Couplers.