Fiber Collimators |
|
Fiber collimators 60FC-...
- Collimating optics with focal lengths ƒ' = 2.7–20 mm for 0.5–3.6 mm beam diameters
- Inclined coupling axis for connectors of the type FC-APC
- Front connection for the attachment of optical adapters
Accessories for 60FC-...
- Micro-Focus Optics 5M
- Polarization Filters 5PF
- Retardation Optics 5WP
- Adapters
|
|
Fiber collimators 60FC-L-..., 60FC-T-...
- Collimating optics with focal lengths f' = 20–20 mm for 3.6–36 mm beam diameters
- Inclined coupling axis for connectors of the type FC-APC
- With and without Tilt adjustment for aligning the optical axis with the mechanical axis
- Front connection for the attachment of optical adapters
Accessories for 60FC-L-..., 60FC-T-...
- Micro focus optics 13M-… and 25M-…
- Polarisation filters 13PF-…
Iris diaphragms 5BL-…,13 BL-… , 25 BL-… , 40 BL-…
- For adjusting the collimated beam diameter
Clamp Collars CC-…
- For adjusting the collimated beam diameter
|
|
Pilot beams using fiber collimator 60FC-… 60FC-L-…, 60FC-T-…
- Approximately constant beam diameter across entire working range, obtained by fine adjustmen
- Different beam diameters and working distances
|
|
RGBV Fiber Collimators 60FC-…: Apochromatically corrected fiber collimators
- Chromatically corrected for the entire wavelength range 400–660 nm
- Available with two focal lengths: 11 and 42 mm
|
|
Fiber collimators 60FC-Q... with integrated quarter-wave plate
- For the direct implementation of circularly polarized radiation
- Fully alignable after assembly by use of cogged adjustment tool
|
|
Fiber collimators with elliptical beams 60FC-E...
- Gaussian profile
- Elliptical axis ratios, e.g. 15:5 mm
- Integrated quarter-wave plates as option
|
|
Fiber couplers 60FC-K-... for kineMATIX optomechanics
- Flexible interchanging of fiber cables (singlemode, polarization-maintaining and multimode fibers)
- FC-APC or FC-PC fiber connector, DIN-AVIO and F-SMA (0°-, 5°- and 8°-polish) fiber connectors
- Focussing of the optics
- Use with fibers with end caps for a reduced power density at the fiber end face
|
|
Fiber couplers 60FC-SMA-... for SMA-905 High Power Connectors
- Specially designed for SMA-905 High Power connectors with 0°-, 5°- and 8°-polish
- Compatible with photonic crystal fibers
- Integrated tilt and focussing adjustment
|
|
Fiber Couplers 60FC-F-... with fine-focussing mechanism
- Focussing via fine-focussing mechanism adjustable with knurled ring
- High pointing stability
- Focal lengths 4.5 to 12 mm
|
|
Fiber collimators with dichroic beam combiner
- Laser beams of different wavelengths are combined and collimated
- Especially designed for wavelengths that cannot be transmitted by one singlemode fiber
Fiber collimators with integrated power monitor 60FC-PD-...
- For online control of laser power and power fluctuations
Retroreflectors 60FC-RR-...
- With integrated quarter-wave plate
- For reflection of polarized light without changes in state of polarization
Fiber collimators with system mount Ø 19.5 mm
- For integration in the "multicube" system
|
|
Anamorphic beam-shaping Optics 5AN
- Transformation of laser beams from elliptical into circular
- Clear aperture 5 mm
- Integrated astigmatism correction
- Wavelength range 390–2100 nm
- High fiber-coupling efficiency > 80%
|
|
Expansion Optics 48EO-…
The best coupling efficiency for beam diameters <0.4 mm is achieved when the laser beam is expanded in advance.
|