Ultra Low Ratio Tap Coupler
Ultra Low Ratio Tap Coupler
Ultra Low Ratio Tap Coupler | ||||||||||||||||||||||||||||||||||||||
(LTC Series) | ||||||||||||||||||||||||||||||||||||||
The Ultra Low Ratio Tap Coupler splits a very small amount of light from a signal path to a tap port. Low tap ratios | ||||||||||||||||||||||||||||||||||||||
such as 0.1%, 0.01% or 0.001% enable the monitoring photodetector to operate without damage or saturation. It is | ||||||||||||||||||||||||||||||||||||||
suitable for very high optical power, its main application is in the monitoring of optical sources such as fiber lasers. | ||||||||||||||||||||||||||||||||||||||
Specifications | ||||||||||||||||||||||||||||||||||||||
Parameter | Unit | Value | ||||||||||||||||||||||||||||||||||||
Center Wavelength (λc) | nm | 1064, 1550 or Specify | ||||||||||||||||||||||||||||||||||||
Operating Wavelength | nm | λc ± 10 | ||||||||||||||||||||||||||||||||||||
Coupling Ratio | % | 0.1 | 0.01 | 0.001 | ||||||||||||||||||||||||||||||||||
Tap Insertion Loss | dB | 30 ± 3 | 40 ± 4 | 50 ± 5 | ||||||||||||||||||||||||||||||||||
Max. Signal Insertion Loss | dB | 0.1 | ||||||||||||||||||||||||||||||||||||
Thermal Stability | dB/℃ | ≤ 0.002 over -5 °C to +70 °C | ||||||||||||||||||||||||||||||||||||
Min. Return Loss | dB | 55 | ||||||||||||||||||||||||||||||||||||
Max. Optical Power (Continuous Wave) | W | 5 | ||||||||||||||||||||||||||||||||||||
Operating Temperature | ℃ | -5 to +75 | ||||||||||||||||||||||||||||||||||||
Storage Temperature | ℃ | -40 to +85 | ||||||||||||||||||||||||||||||||||||
Fiber Type | Singlemode fiber | |||||||||||||||||||||||||||||||||||||
*IL is 0.5 dB higher, RL is 5 dB lower for each connector added. | ||||||||||||||||||||||||||||||||||||||
*Test at central wavelength only. | ||||||||||||||||||||||||||||||||||||||
*The optical power is 1 W only for connector added. | ||||||||||||||||||||||||||||||||||||||
Package Dimensions | ||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||
Ordering Information | ||||||||||||||||||||||||||||||||||||||
LTC-①-②②-③-④-⑤-⑥ | ||||||||||||||||||||||||||||||||||||||
①: Configuration | ②②: Wavelength | ③: Coupling Ratio | ④: Connector Type | |||||||||||||||||||||||||||||||||||
1 - 1 × 2 | 06 - 1064 nm | 3 - 0.1% (30dB) | 1 - FC/UPC | 4 - SC/APC | ||||||||||||||||||||||||||||||||||
2 - 2 × 2 | 55 - 1550 nm | 4 - 0.01% (40dB) | 2 - FC/APC | N - None | ||||||||||||||||||||||||||||||||||
SS - Specify | 5 - 0.001% (50dB) | 3 - SC/UPC | S - Specify | |||||||||||||||||||||||||||||||||||
S - Specify | ||||||||||||||||||||||||||||||||||||||
⑤: Fiber Jacket | ⑥: Fiber Length | |||||||||||||||||||||||||||||||||||||
B - 250 μm bare fiber | 1 - 1.0 m | |||||||||||||||||||||||||||||||||||||
L - 900 μm loose tube | S - Specify |