Categories

Home>Laser>Femtosecond Fiber Lasers

Femtosecond Fiber Lasers

                                                                   Femtosecond Fiber Lasers

Application
- Amplifier systems seeding
- Terahertz generation and detection
- Multi-photon microscopy
- Ultrafast spectroscopy
- "Pump-probe" spectroscopy
- Optical coherent tomography

Femtosecond Fiber Lasers:EFO

Ultrashort pulse duration down to 50 fs *
Small footprint *
Turn-key operation *
High stability *
Optional: benchtop version *
Application
- Supercontinuum generation (pdf)
- Semiconductor device testing (pdf)
- Amplifier systems seeding 
- Terahertz generation and detection
- Multi-photon microscopy 
- Frequency metrology (pdf)
- Ultrafast spectroscopy
- "Pump-probe" spectroscopy
- Optical coherent tomography
     Fiber-based femtosecond lasers offer robust and stable operation without the need for constant realignment. The low cost and stability of fiber-based femtosecond lasers mean that even beginner research labs can have a femtosecond pulse source without the need for expensive or complicated equipment. This brings ultrafast research into the realm of undergraduate and other educational environments. With pulse lengths of 100 fs at 1550 nm fiber femtosecond lasers can also be used as seed sources for femtosecond fiber amplifiers. The 1550 nm wavelength of Er-doped fiber lasers also makes them an attractive tool for ultrahigh-speed optical communications applications.
    
    The second harmonic version EFOA-SH with wavelength 780 nm is also available.
 

EFO-80/10

EFO-T/50

EFOA-T/P

Pulse width (fixed), fs

<80*

250-5000**

100-250**

Wavelength (fixed), nm

1560±10

Average output power, mW

10*

50

100-250**

Repetition rate (fixed), MHz

70

25-80***

70 
(40-80 on request)

Polarization, linear

vertical or horizontal***

horizontal

Spatial mode

TEMoo

Fiber output

available upon request

RF SYNC out

SMA connector (200-300 mV@50 ohm load)

Mode lock status

SMA connector (3.5/0 V) and LED

Service optical output

FC/APC (~1 mW)

Laser head dimensions, mm 
Power supply unit dimensions, mm

180x210x50(70)
230x200x85

180x210x70(90)
230x200x130

* - <100 fs @ 20 mW or <50 fs @ 10 mW specs upon request.
** - pulse duration (T) and output power (P for EFOA) should be selected with your request. For the EFOA model, the (lowest available pulse duration)/(highest avaialbe average power) relation is equal to 1 (i.e. at 100 fs the highest possible power is 100 mW, at 250 fs - 250 mW etc).
*** - please specify with your request.

25 other products in the same category: