Singlemode Wavelength Division Multiplexers (980/1064) | |||||||||||||||||||||
(WDM Series ) | |||||||||||||||||||||
The Singlemode Wavelength Division Multiplexers combine or separate light at different wavelengths. They | |||||||||||||||||||||
offer very low insertion loss, low polarization dependence, high isolation, and excellent enviromental stability. | |||||||||||||||||||||
These components have been extensively used in EDFA, CATV, WDM networks and fiber optics | |||||||||||||||||||||
instrumentation. | |||||||||||||||||||||
Specifications | |||||||||||||||||||||
Parameter | Unit | Value | |||||||||||||||||||
Center Wavelength (λc) | nm | 980/1064 | |||||||||||||||||||
Operating Wavelength | nm | λc ± 5 | |||||||||||||||||||
Min. Isolation | dB | 13 | |||||||||||||||||||
Max. Insertion Loss | dB | 0.35 | |||||||||||||||||||
Max. Polarization Dependent Loss | dB | 0.1 | |||||||||||||||||||
Thermal Stability | dB/℃ | ≤ 0.002 over -5 ℃ to +70 ℃ | |||||||||||||||||||
Min. Return Loss | dB | 60 | |||||||||||||||||||
Min. Directivity | dB | 60 | |||||||||||||||||||
Max. Optical Power (Continuous Wave) | mW | 300 | |||||||||||||||||||
Operating Temperature | ℃ | -5 to +70 | |||||||||||||||||||
Storage Temperature | ℃ | -40 to +85 | |||||||||||||||||||
*IL is 0.5 dB higher, RL is 5 dB lower for each connector added. | |||||||||||||||||||||
*Test at central wavelength only. | |||||||||||||||||||||
Package Dimensions | |||||||||||||||||||||
|
|||||||||||||||||||||
Ordering Information | |||||||||||||||||||||
WDM-①-②②②②-③-④-⑤-⑥ | |||||||||||||||||||||
①: Configuration | ③: Connetor Type | ||||||||||||||||||||
1 - 1 × 2 | 1 - FC/UPC | 4 - SC/APC | |||||||||||||||||||
2 - 2 × 2 | 2 - FC/APC | N - None | |||||||||||||||||||
3 - SC/UPC | S - Specify | ||||||||||||||||||||
④: Fiber Jacket | ⑥:Fiber Type | ||||||||||||||||||||
B - 250 μm bare fiber | H - HI 1060 fiber | ||||||||||||||||||||
L - 900 μm loose tube | F - HI 1060 Flex fiber | ||||||||||||||||||||
S - Specify |